Bx-SL011 Automatic Light Control Switch Sensor Photo Cell Street Controller for Outdoor

• Remote Control: Without Remote Control
• Load Type: Direct
• lighting Variation: Stepless
• Switch Device: Active
• Application: Exhibition Hall
• Power Source: DC
• Model NO.: BX-SL011
• Control Mode: Electronic Dimmer
• Operating Voltage: 220-240V/AC
• Power Frequency: 50Hz
• Ambient Light: 5~45 Lux
• Rated Current: 10A
• Specification: 47.5*27*43CM
• Trademark: BXST
• Origin: Wenzhou, China
• HS Code: 85363000
• Production Capacity: 1000

Product Description

SPECIFICATION

Power source: 220-240V/AC

Power Frequency: 50/60Hz

Rated Current: 10A  

Ambient Light: <10-45LUX

Working Temperature: -20~+40ºC 

Working Humidity: <93%RH

INSTALLATION

 Switch off the power. Unload the black bottom from the white roof directly.

 Unscrew two nails in the black bottom and unload into two parts.

 Pass the wire through the hole in the bottom and connect the power according to the connection-wire diagram.

 Install back the two nails and according to the correct installation place install the item with the enclosed inflated screws.

 Install back the white roof onto the black bottom. Turn on the power and then test it.

TEST

 Switch on the power.

 When you test in daytime. You should cover a black opaque cloth on the product.

 When the cloth mantles the detection window of the photocell, the ambient light of the photocell is dark, the lamp will be on.

 When you take off this cloth, the lamp will be off automatically.

NOTE

 In front of the photocell, it should be no obstruction affecting to accept natural light;

 In front of the photocell, it should be no swaying object.

 Don't install the photocell under the light or in the place where the light will be irradiated to the photocell.